Adjust Lock Setting Function - Sunx FX-301 Operation Manual

9-4. Adjust Lock Setting Function

This function allows the selection of Adjust Lock OFF or Adjust Lock ON to either permit or disallow operation of
the 'threshold value fine adjustment mode', respectively, from within the 'RUN mode' (normal sensing operation).
The digital display will quickly
blink 3 times to confirm the setting.
Press the MODE key
5 times.
Move the Jog switch toward the
' ' direction 5 times.
Press the Jog switch.
Move the Jog switch toward the
' ' direction twice.
Press the Jog switch.
Move the Jog
switch.
Press the
Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
Press the MODE key
3 times or keep it
pressed for 2 sec. or more.
When Adjust Lock is ON,
in the MODE indicator / ADJ
will not light up.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
select 'PRO5 mode'.
3 Press the [Jog switch] to enter the 'code setting' state.
4 Move the [Jog switch] toward the '
enter the 'adjust lock setting' state.
5 If the [Jog switch] is pressed, the current setting will be
displayed.
* The factory setting is '
6 If the [Jog switch] is moved, the digital display will blink.
Select either ' ' or '
If ' ' is selected, operation of the threshold value fine
adjustment is permitted during 'RUN mode'.
7 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, to confirm the setting.
8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
51
' direction 5 times, to
' direction twice, to
'.
'.