Pro2 Mode; Pro2 Mode Functions And Settings - Sunx FX-301 Operation Manual

6

PRO2 Mode

6-1. PRO2 Mode Functions and Settings

PRO2 mode is used mainly for selecting the detailed configuration of the digital display.
:Digital Display Setting Function
Refer to p.33 for setting procedure
:Digital Display Inversion Function
Refer to p.34 for setting procedure
This function allows the display to be switched among the different digital displays:
(incident light intensity display / percentage display / peak hold display / bottom hold
display). However, when FX-302 is in window comparator mode, the percentage
display function cannot be utilized.
* The factory setting is incident light intensity display.
Incident light intensity display
This function displays the
incident light intensity within
a range of 0 to 4,000.
display
Peak hold
This function displays the
peak numerical value of
the incident light intensity.
display
Bottom hold
This function displays the
bottom numerical value of
the incident light intensity.
Display Timing for Peak Hold and Bottom Hold
Please note that the peak hold and bottom hold values will be resampled consecutively.
Incident light intensity
2068
1820
705
146
Peak
hold
Bottom
hold
This function can be used to invert the display orientation, according to the
direction of amplifier installation.
* The factory setting is Turn OFF.
When set to Turn OFF
31
Percentage display
This function displays the incident light intensity
within a range of 1 P (1 %) to 999 P (999 %),
based on the threshold value as a standard.
Alternating display
Alternating display
Display indicates the peak Display indicates the peak
value or bottom value within value or bottom value within
the graph area ' '. the graph area '
When set to Turn ON
Time
'.