Data Bank Save Setting Function - Sunx FX-301 Operation Manual

7-3. Data Bank Save Setting Function

This function saves amplifier configuration settings.
Up to 3 sets of configuration settings information can be saved using '
Move the Jog switch to select the
desired channel for saving.
Channel 1
The digital display will blink twice to confirm the setting.
Press the MODE
key 5 times.
Move the Jog switch toward
' '
the direction 3 times.
Press the Jog switch.
Move the Jog switch once,
toward the ' ' direction.
Press the Jog switch.
Channel 2 Channel 3
Press the
Jog switch.
Select from YES/NO by
moving the Jog switch.
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
' '
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
to select 'PRO3 mode'.
3 Press the [Jog switch] to enter the 'data bank load setting' state.
4 Move the [Jog switch] once toward the '
to enter the 'data bank save setting' state.
5 If the [Jog switch] is pressed, the digital display will blink.
6 If the [Jog switch] is moved, the 'channel' will be changed.
Select the desired 'channel' for saving.
7 If the [Jog switch] is pressed, the letters '
8 If the [Jog switch] is moved, '
alternately displayed.
9If the [Jog switch] is pressed while '
configuration settings will be loaded from the selected
'channel'. The digital display will blink twice to confirm the
new setting.
If the [Jog switch] is pressed while '
will return to the 'data bank save setting' state.
0 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
40
' and ' ' .
' direction 3 times,
' direction,
' will blink.
' and ' ' will be
' is blinking, the
' is blinking, the unit