Digital Display Inversion Function - Sunx FX-301 Operation Manual

6-3. Digital Display Inversion Function

This function can be used to invert the display orientation, according to the direction of amplifier installation.
Turn OFF
Select the desired display
orientation by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
When Turn ON
Press the MODE
1 Press the [MODE key] 5 times to select 'PRO mode'.
key 5 times.
Move the Jog switch toward
2 Move the [Jog switch] toward the '
the ' ' direction twice.
to select 'PRO2 mode'.
Press the
3 Press the [Jog switch] to enter the 'digital display setting' state.
Jog switch.
Move the Jog switch
4 Move the [Jog switch] once toward the '
once, toward the ' '
to enter the 'digital display inversion setting' state.
direction.
Press the
5 If the [Jog switch] is pressed, the current
Jog switch.
'display orientation' will be displayed.
* The factory setting is Turn OFF.
Turn ON
6 If the [Jog switch] is moved, the digital display will blink.
Select the desired 'display orientation'.
Press the
Jog switch.
7 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the 'display orientation' setting.
Press the MODE key 3
times or keep it pressed
8 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
To return the display to the original state, select the
setting Turn OFF.
34
' direction twice,
' direction,