Stability Function - Sunx FX-301 Operation Manual

5-6. Stability Function

This function permits selection among three different stability indicator response levels
(margin width: 5 % /
S-01
margin
width:
5 %
Select the desired stability level
by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
10 % / 15 % ), for changes in the range of incident light.
Press the MODE
key 5 times.
Move the Jog switch
once, toward
the ' ' direction.
Press the
Jog switch.
Move the Jog switch
toward the ' ' direction
3 times.
Press the
Jog switch.
S-02 S-03
margin margin
width: width:
10 % 15 %
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] once toward the '
to select 'PRO1 mode'.
3 Press the [Jog switch] to enter the 'response time change' state.
4 Move the [Jog switch] toward the '
to enter the 'stability setting' state.
5 If the [Jog switch] is pressed, the current setting for
'stability level' will be displayed.
* The factory setting is S-02 (margin width:
6 If the [Jog switch] is moved, the digital display will blink.
Select the desired 'stability level'.
7 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming 'stability level' setting.
8 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
28
' direction,
' direction 3 times,
10 %).