Program Storage And Operation - Mitsubishi Q00JCPU User Manual

1
OVERVIEW

1.2 Program Storage and Operation

(1) Program storage
Basic
Note1.1
Note1
Basic
Note1.1
1
1.2 Program Storage and Operation
- 17
(a) Storage of program created by GX Developer
The program created by GX Developer can be stored into the program memory,
standard ROM or memory card
1) Basic model QCPU
Program memory
Parameter
Device comment
Standard ROM
Parameter
Device comment
Standard RAM
CPU shared memory
* 1 : The standard ROM is used to ROM the program memory.
* 2 : The standard RAM is a memory used for the file registers.
* 3 : The intelligent function module parameters set by GX Configurator are included.
* 4 : The Q00JCPU does not have the standard RAM.
The file registers are unavailable.
* 5 : Refer to the following manual for the CPU shared memory.
QCPU User's Manual (Multiple CPU System)
Diagram 1.7 Memory configuration and storage destinations of Basic model QCPU
The Basic model QCPU cannot use a memory card.
Note1.1
of the CPU
3
Program
Device initial value
1
3
Program
Device initial value
2 4
File register
5
module.Note1
CPU module