Network Parameters - Mitsubishi Q00JCPU User Manual

8
PARAMETERS

8.3 Network Parameters

This section explains the network parameter list and parameter details.
8
8.3 Network Parameters
- 32
mn, M and N in the Parameter No. field of this section
mn, M and N in the Parameter No. field of this section indicate the following.
Mn : Indicates a "start I/O No.
** : Indicates any value.
N : Indicates the module number.
M : Indicates the network type.
Table8.27 In the case of MELSECNET/H, Ethernet setting (
M
1 MELSECNET/10 mode (Control station), MELSECNET/H mode (Control station)
H
2 MELSECNET/10 mode (Normal station), MELSECNET/H mode (Normal station)
H
5 MELSECNET/H (Remote master)
H
A MELSECNET/H (Standby station)
H
B MELSECNET/H mode multiplexed remote I/O network master station
H
MELSECNET/H mode multiplexed remote I/O network sub-master station
D
H
(When there is no parameter setting)
MELSECNET/H mode multiplexed remote I/O network sub-master station
E
H
(When there is parameter setting)
Table8.28 In the case of CC-Link setting (
M
0 Master station
H
1 Local station
H
2 Standby master station
H
16" value.
Network type
(3) in this section)
Network type
(1), (2) in this section)