Mitsubishi Q00JCPU User Manual page 604

APPENDICES
Number Name
Memory card (A)
SM600
usable flags
Memory card (A)
SM601
protect flag
SM602 Drive 1 flag
SM603 Drive 2 flag
Memory card (A) in-
SM604
use flag
Memory card (A)
SM605 remove/insert prohibit
flag
Memory card remove/
SM609
insert enable flag
Drive 3/4 usable flags
SM620
Memory card B usable
flags
Drive 3/4 protect flag
SM621
Memory card B protect
flag
SM622 Drive 3 flag
SM623 Drive 4 flag
Memory card B in-use
SM624
flag
Memory card B
SM625 remove/insert prohibit
flag
App
Appendix 1 Special Relay List
- 9
(6) Memory cards
Meaning
OFF : Unusable
• ON when memory card (A) is ready for use by user
ON : Use enabled
OFF : No protect • Goes ON when memory card (A) protect switch is
ON : Protect ON
OFF : No drive 1 • Turns ON when the mounted memory card (A) is
ON : Drive 1 present RAM
OFF : No drive 2 • Turns ON when the mounted memory card (A) is
ON : Drive 2 present ROM
OFF : Not used
• Goes ON when memory card (A) is in use
ON : In use
OFF : Remove/insert enabled
• Goes ON when memory card (A) cannot be inserted
ON : Remove/insert
or removed
prohibited
• Turned ON by user to enable the removal/insertion
of memory card.
OFF : Remove/insert
• Turned OFF by the system after the memory card is
prohibited
removed.
ON : Remove/insert enabled
• This contact can be used only when SM604 and
SM605 are OFF.
OFF : Unusable
• Always ON
ON : Use enabled
OFF : Unusable
• ON when memory card B is ready for use by user
ON : Use enabled
OFF : No protect
• Always OFF
ON : Protect
OFF : No protect
• Goes ON when memory card B protect switch is ON
ON : Protect
• Always ON
OFF : No drive 3
ON : Drive 3 present
• Goes ON when drive 3 (card 2 RAM area) is present
• Always ON
OFF : No drive 4
ON : Drive 4 present
• Goes ON when drive 4 (card 2 ROM area) is present
• Goes ON when the file within Drive 3 (standard
OFF : Not used
RAM) or Drive 4 (standard ROM) is used.
ON : In use
• Goes ON when memory card B is in use
OFF : Remove/insert enabled
• Goes ON when memory card B cannot be inserted or
ON : Remove/insert
removed
prohibited
TableApp.7 Special relay
Explanation
Corres-
ponding
Set by
Corresponding CPU
ACPU
(When Set)
M9
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Status change) New
U New
S/U New
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Initial) New
S (Status change) New
S (Status change) New
U New
QnA
Qn(H)
QnPH
QnPRH
Qn(H)
QnPH
QnPRH
QCPU
Q2A(S1)
Q3A
Q4A
Q4AR
QCPU
Q2A(S1)
Q3A
Q4A
Q4AR
QCPU
Q2A(S1)
Q3A
Q4A
Q4AR
QCPU
Q2A(S1)
Q3A
Q4A
Q4AR
QCPU
Q2A(S1)
Q3A
Q4A
Q4AR