Mitsubishi Q00JCPU User Manual page 425

8
PARAMETERS
(9) Serial communication
Item Parameter No.
Use serial
communication
Transmission speed
Sum check
100E
Transmission wait time
RUN write setting
Set the transmission speed, sum check, message waiting time and online program
change enabled/disabled when the serial communication function of the Q00CPU or
Q01CPU is used.
Table8.9 Serial communication list
Description
Check the check box when using
the serial communication
function.
Set the transmission speed for
data communication with the
external device.
Set whether or not a sum check
code is added to the
transmission message and
receive message according to
the external device
specifications when data
H
communication is made by the
serial communication function.
Set the Basic model QCPU side
transmission waiting time when
the external device cannot
receive data immediately after
receipt of data.
Set whether the external device
will write data to the CPU
module if the CPU module is
during RUN.
Diagram 8.9 Serial communication
Setting range
Do not use/Use serial
communication function
9.6kbps/19.2kbps
/38.4kbps/57.6kbps
/115.2kbps
No/Yes
No waiting/10ms to 150ms
(10ms unit)
Disable/Enable
8.1 PLC Parameters
8.1.1 Basic model QCPU
Default value Reference
Do not use serial
communication
function
19.2kbps
Yes
Section 6.24
No waiting time
Disable
8
1
2
3
4
5
6
7
8
- 11