Mitsubishi Q00JCPU User Manual page 576

10
CPU MODULE PROCESSING TIME
Basic Process Redundant
(2) Floating point arithmetic processing (
Note10.12 Note10.12
Note10.12
Remark
Note13
Basic Process Redundant
Note10.12 Note10.12Note10.12
10
10.1 Scan Time
- 18
10.1.4 Factors that can shorten scan time by changing the settings
The time required for the arthmetic processing of the instruction using a floating point
can be shortened by selecting "Do not perform internal operation processing with
double precision" (remove the check mark on the setting screen) in the PLC system
setting.
Remove checkmark!
Diagram 10.6 Floating point arithmetic processing screen
Refer to the following manual for the arithmetic processing time of the instruction
using a floating point.
QCPU (Q Mode)/QnACPU Programming Manual (Common Instructions)
The Basic model QCPU, Process CPU and Redundant CPU do not support the floating-point
arithmetic processing setting.
Note10.12
Section 8.1.2(2)) Note13