Mitsubishi Q00JCPU User Manual page 408

7
COMMUNICATION WITH INTELLIGENT FUNCTION
MODULE
(3) Precautions
Remark
7
7.1 Communication Between CPU Module and Intelligent Function Modules
- 4
7.1.1 Initial setting and auto refresh setting by GX Configurator
(b) Auto refresh setting
For the auto refresh setting, designate the device at the CPU module to store the
following data.
• Digital output of Q64AD
• Maximum/minimum values of Q64AD
• Error code
The auto refresh setting of Q64AD is designated on the following auto refresh
setting screen of GX Configurator (Diagram 7.2).
The designated auto refresh setting data is stored in the intelligent function
parameters of the CPU module.
The AnS series corresponding special function module does not support the settings
made by GX Configurator.
For the details of GX Configurator, refer to the manual of the intelligent function
module being used.
Diagram 7.2 Auto refresh setting screen