Mitsubishi Q00JCPU User Manual page 335

6
FUNCTIONS
(3) Precautions
Basic
Note6.37
Note38
Basic
The Basic model QCPU does not support the monitor based on the set monitoring conditions.
Note6.37
(a) Monitor condition setting
Monitor condition setting can be made by only one GX Developer.
(b) Necessity of system area setting
If the user setting system area is not created, simultaneous monitor from other
stations can be executed, but the monitor speed decreases.
The system area is in the same area as the program memory, so the area of the
stored program decreases when the system area is set.
(c) The number of nodes that can be set to monitor at higher speed
When multiple nodes are monitoring one CPU module simultaneously, a certain
number (number of user setting system areas (k steps) + 1) of them can be set to
monitor at higher speed.
For example, when 15k steps of user setting system areas are created, Up to 16
nodes can be set to monitor one CPU module at higher speed.
6.15.1 Simultaneous monitoring execution by multiple users
Note6.37
Note38
6.15 Debug Execution by Multiple Users
1
2
3
4
5
6
7
8
6
- 94