Mitsubishi Q00JCPU User Manual page 219

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Precautions
(a) Setting of check at communication time of GX Developer
(b) When writing files from GX Developer of other station via CC-Link
Since long processing time is required for writing files to the standard ROM or
Flash card, set the GX Developer's check at communication time to 60 seconds or
more. If the time for the check at communication time is too short, GX Developer
may time out.
Diagram 5.27 Check at communication time
Since long processing time is required for writing files to the standard ROM or
Flash card, set the CPU monitoring time setting (SW000A) of CC-Link to 60
seconds or more.
(The default value of 90 seconds can be used.)
GX Developer of other station
Diagram 5.28 Write from GX Developer of other station (via CC-Link)
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
5.2.6 Write to standard ROM and Flash card by GX Developer
CPU module where file is
written to standard ROM
1
2
3
4
5
6
7
8
5
- 37