Mitsubishi Q00JCPU User Manual page 65

2
PERFORMANCE SPECIFICATION
High Performance model QCPU
Q12HCPU Q25HCPU
4096 points (P0 to 4095), set parameter values to select usable range of in-file pointer / shared pointers.
The specified intervals of the system interrupt pointers I28 to I31 can be set with parameters.
(0.5 to 1000ms, 0.5 ms/unit) Default I28 : 100ms I29 : 40ms I30 : 20ms I31 : 10ms
Specified form : J
Device having a direct access to the buffer memory of the intelligent function module.
(Latch range can be set for B, F, V, T, ST, C, D, and W.)
RUN and PAUSE contacts can be set from among X0 to 1FFF, respectively.
Year, month, day, hour, minute, second, day of the week
(leap year automatic distinction)
Accuracy -3.18 to +5.25s (TYP. +2.12s) /d at 0
Accuracy -3.93 to +5.25s(TYP. +1.90s)/d at 25
Accuracy -14.69 to +3.53s(TYP. -3.67s)/d at 55
Varies according to the type of power supply module.
27.4mm
0.20kg
Remark
Process CPU
Q12PHCPU Q25PHCPU
2048 points(SB0 to 7FF)
2048 points(SW0 to 7FF)
8192 points(S0 to 8191)
16 points(Z0 to 15)
256 points (I0 to 255)
2048 points(SM0 to 2047)
2048 points(SD0 to 2047)
16 points(FX0 to F)
16 points(FY0 to F)
5 points(FD0 to 4)
----
Device having a direct access to link device.
MELSECNET/10(H) use only.
\X ,J \Y ,J \W
J \SB
Specified form : U \G
L0 to 8191 (default)
0.64A
98mm
89.3mm
Refer to the following manual for the general specifications.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Redundant CPU
Q12PRHCPU Q25PRHCPU
Max. 100k words
,J \B ,J \SW ,
Year, month, day, hour, minute, second,
day of week
(Automatic leap year judgment)
Accuracy-3.2 to +5.27s(TYP.+2.07s)/d at
0
Accuracy -2.77 to +5.27s(TYP.+2.22s)/d
at 25
Accuracy -12.14 to +3.65s(TYP.-2.89s)/d at
55
0.89A
55.2mm
0.30kg
Remark
The number of device points
is fixed.
QnPRHCPU User's
Manual (Redundant
System)
Section 9.4
Section 9.5
Set parameter values to
specify
Section 6.5
----
----
----
----
----
----
2
- 8
1
2
3
4
5
6
7
8