Debug Execution By Multiple Users - Mitsubishi Q00JCPU User Manual

6
FUNCTIONS

6.15 Debug Execution by Multiple Users

(1) Debug Execution by Multiple Users
Basic
Note6.34
(2) Function Description
Basic
Note6.35
Basic
Note6.36
Note35
Basic
Note6.34
Note36
Basic
Note6.35
Note37
Basic
Note6.36
6
6.15 Debug Execution by Multiple Users
- 91
This function performs debugging from multiple GX Developer connected to CPU
module or Serial communication module at the same time.
When a file has been divided according to the process, function, etc., the divided files
can be debugged simultaneously from multiple GX Developer.
The debug function combination for multiple users are as follows:
Table6.26 Combined use of Debug function and other functions
Functions being
executed
Monitor
Write during RUN
Execution time
measurement
Sampling trace
: Can be executed simultaneously. However, since the monitor condition setting
( Section 6.11.1) can be made from only one GX Developer, the monitor condition
cannot be set on other GX Developer.
: Can only be performed from one GX Developer.
Irrelevant to Basic model QCPU, since a file cannot be divided according to the process or
function.
The Basic model QCPU does not support sampling trace.
The Basic model QCPU does not support the monitor condition-set monitor.
Note36
Functions executed later
Write during
Monitor
RUN
Note6.36
Note37
Note6.34
Note35
Note6.35
Execution time
Sampling trace
measurement