Mitsubishi Q00JCPU User Manual page 313

6
FUNCTIONS
Basic
Note6.27
Note27
Since the Basic model QCPU cannot execute multiple programs, the execution status of each
Basic
program is displayed as shown below.
Note6.27
(c) Execution status of each program
The execution status of program specified at the Program tab screen in the (PLC)
Parameter dialog box is displayed.
1) Program
The program name is displayed in the order set in the parameter.
2) Execute
The program type set in the parameter is displayed.
3) Scan Time
The actual scan time (current value) is displayed. At the program stop (wait)
status, the scan time is displayed as 0.000 ms.
4) Execute count
The number of times the program was executed is displayed, setting the
starting point of when the measurement is started as "0". The number of
execution times is displayed up to 65535 times and returns to 0 when the
65536th time measurement is made. The ex times remains even when the
program is stopped.
Program : MAIN or MAIN-SFC
Execute : Scan
Note6.27
Note27
6.13 Execution Time Measurement
6.13.1 Program list monitor
1
2
3
4
5
6
7
8
6
- 72