Mitsubishi Q00JCPU User Manual page 243

6
FUNCTIONS
Item
Error time output mode setting
Hardware error time CPU operation
mode setting
Switch setting of intelligent function
module
Monitoring function
Set monitor conditions
Monitor/test local Devices
Turn ON/OFF external I/O
Write during RUN
Program list monitor
Interrupt program monitor
Scan time measurement
Sampling trace function
Multiple-user debugging function
Watchdog timer
Self-Diagnosis function
Failure history
System protect
Table6.2 CPU module function list (Continued)
Description
This function sets whether the output to the Q series
compatible output module, hybrid I/O module or
intelligent function module will be cleared or held when
the CPU module results in a stop error.
This function sets whether the operation of the CPU
module will be stopped or continued when the hardware
error of the intelligent function module occurs.
Use this function for various settings of the intelligent
function module. (Refer to the manual of the corre-
sponding intelligent function module for settings.)
This function monitors the status of programs and
devices on the CPU module by operating from the GX
Developer.
This function monitors using a fine timing of the CPU
module.
This function monitors and/or tests the local devices of
the designated program using the GX Developer.
This function forcibly turns the external I/O of the CPU
module on or off from the GX Developer.
This function writes programs when the CPU module is
in the RUN status.
This function displays the processing time of a program
being executed.
This function displays the number of times to execute an
interrupt program.
This function measures the execution time of a program
between selected steps.
This function samples specified device data from the
CPU module at a specified timing.
This function enables multiple users to debug programs
by using several GX Developers.
This function monitors operational delays caused by
CPU module's hardware and program errors.
This function enables the CPU module to check for
failures.
This function stores a failure history of diagnosis results
in the memory.
This function prevents the programs from being
modified from GX Developer, serial communication
module Ethernet module or like.
CPU module Reference
1) 2) 3) 4) section
Section 6.8
Section 6.9
Section
6.10
Section
6.11
Section
6.11.1
Section
6.11.2
Section
6.11.3
Section
6.12
Section
6.13.1
Section
6.13.2
Section
6.13.3
Section
6.14
Section
6.15
Section
6.16
Section
6.17
Section
6.18
Section
6.19
: Available
(Continued on next page)
6.1 Function List
1
2
3
4
5
6
7
: N/A
8
6
- 2