Xcommand Peripherals Pairing Devicediscovery Start; Xcommand Peripherals Pairing Pair; Xcommand Peripherals Pairing Unpair; Xcommand Peripherals Purge - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Peripherals Pairing DeviceDiscovery Start

Start device discovery to detect ISDN Links in the same network.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing DeviceDiscovery Start [AutoPairing: AutoPairing]
[DeviceType: DeviceType] [Timeout: Timeout]
where
: On/Off
AutoPairing
You can select to automatically pair the detected device to the endpoint.
: ISDNLink
DeviceType
Only look for ISDN Link.
: Integer (3..60)
Timeout
Set a maximum time for the search from 3 to 60 seconds.

xCommand Peripherals Pairing Pair

Pair an ISDN Link to an endpoint.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Pair MacAddress: "MacAddress"
where
: String (1, 1450)
MacAddress
Enter the MAC address for the ISDN Link you wish to pair to the endpoint.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xCommand xCommand

xCommand Peripherals Pairing Unpair

Unpair endpoint from an ISDN Link, when the two have contact.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Unpair MacAddress: "MacAddress"
where
: String (1, 100)
MacAddress
MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the
endpoint.

xCommand Peripherals Purge

Force unpair an endpoint from an ISDN Link when a connection has been lost. Note: You must
also unpair the ISDN Link to be able to pair it to another endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Peripherals Purge ID: "ID"
where
: String (1, 100)
ID
Mac address of the ISDN Link in the format "xx:xx:xx:xx:xx:xx".
127
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.