Standby Commands; Xcommand Standby Activate; Xcommand Standby Deactivate; Xcommand Standby Resettimer - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

Standby commands

xCommand Standby Activate

Set the system in standby mode, which turns off the video outputs and put the camera into
sleep mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby Activate

xCommand Standby Deactivate

Bring the system out of standby mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby Deactivate

xCommand Standby ResetTimer

Set a temporary standby delay. If the system is in standby mode when the reset timer is set,
the system is brought out of standby mode. When left idle for the given delay the system goes
into standby mode. Setting the reset timer does not affect the Standby Delay in the Advanced
configuration menu (or by xConfiguration Standby Delay). Next time this delay is the valid
standby delay.
Requires user role: ADMIN, USER
USAGE:
xCommand Standby ResetTimer Delay:
where
: Integer (1..480)
Delay
Set the delay in minutes.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration
Delay
xCommand xCommand

SystemUnit commands

xCommand SystemUnit Boot

Reboot the system.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit Boot [Action: Action]
where
: Restart/Shutdown
Action
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart.

xCommand SystemUnit FactoryReset

Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit FactoryReset Confirm:
TrailingAction]
where
: Yes
Confirm
Include to confirm your choice.
: NoAction/Restart/Shutdown
TrailingAction
Select Shutdown or NoAction to override the default behaviour (Restart).
137
API Reference Guide
xStatus Appendices
Confirm [TrailingAction:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.