Peripherals Status; Xstatus Peripherals; Xstatus Peripherals Connecteddevice [N] Hardwareinfo; Xstatus Peripherals Connecteddevice [N] Id - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xStatus NetworkServices NTP Status

Returns the status of the endpoints synchronizing with the NTP server.
Discarded: The NTP result has been discarded.
Synced: The system is in sync with the NTP server.
NotSynced: The system is not in sync with the NTP server.
Unknown: The state of the synchronization is unknown.
Off: No synchronization with the NTP server.
Value space of the result returned:
Discarded/Synced/NotSynced/Unknown/Off
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xCommand

Peripherals status

xStatus Peripherals

Shows the top level overview of the peripherals status.

xStatus Peripherals ConnectedDevice [n] HardwareInfo

Shows hardware information about connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 HardwareInfo
*s Peripherals ConnectedDevice 1007 HardwareInfo: "1122330-0"
** end

xStatus Peripherals ConnectedDevice [n] ID

Shows the MAC-address of the connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 ID
*s Peripherals ConnectedDevice 1007 ID: "00:10:20:20:be:21"
** end

xStatus Peripherals ConnectedDevice [n] Name

Shows the product name of connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 Name
*s Peripherals ConnectedDevice 1007 Name: "Cisco TelePresence Touch"
** end
179
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.