Xcommand Systemunit Softwareupgrade; Time Commands; Xcommand Time Datetime Get; Xcommand Time Datetime Set - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand SystemUnit SoftwareUpgrade

Initiate a software upgrade by fetching the software from a given URL. If the server requires
username and password these parameters must be included.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit SoftwareUpgrade URL: "URL" [UserName: "UserName"] [Password:
"Password"] [Forced: Forced]
where
: String (0, 255)
URL
The software package location
: String (0, 255)
UserName
User name to access the server location, if needed.
: String (0, 255)
Password
Password to access the server location, if needed.
: False/True
Forced
You can force a system to accept a software upgrade immediately, without giving users
a chance to acknowledge or postpone the update.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xCommand xCommand

Time commands

xCommand Time DateTime Get

Read the time and date from the system.
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Get

xCommand Time DateTime Set

Set the date and time for the system, if not available from NTP (Network Time Protocol).
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Set [Year: Year] [Month: Month] [Day: Day] [Hour: Hour]
[Minute: Minute] [Second: Second]
where
: Integer (2015..2037)
Year
: Integer (1..12)
Month
: Integer (1..31)
Day
: Integer (0..23)
Hour
: Integer (0..59)
Minute
: Integer (0..59)
Second
139
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.