Xcommand Video Selfview Set - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Video Selfview Set

Sets self-view on/off and specifies its size and position. If the parameter is not specified,
current value is used.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Selfview Set [Mode: Mode] [FullscreenMode: FullscreenMode]
[PIPPosition: PIPPosition] [OnMonitorRole: OnMonitorRole]
where
: On/Off
Mode
Selfview is set to on or off.
: On/Off
FullscreenMode
Choose between displaying the self-view in full screen or as picture-in-picture.
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
PIPPosition
UpperRight
Select the position for the self-view image.
: First/Fourth/Second/Third
OnMonitorRole
Displays self-view on monitors with this role.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xCommand xCommand
149
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.