Xcommand Systemunit Notifications Removeall; Xcommand Systemunit Optionkey Add; Xcommand Systemunit Optionkey List; Xcommand Systemunit Optionkey Remove - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand SystemUnit Notifications RemoveAll

Clears the list of system notifications that are reported by xStatus SystemUnit Notifications
Text/Type.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit Notifications RemoveAll

xCommand SystemUnit OptionKey Add

Add an option key to support additional features.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey Add Key: "Key"
where
: String (16, 24)
Key
The key you have received for the option you wish to switch on.

xCommand SystemUnit OptionKey List

List all option keys.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey List

xCommand SystemUnit OptionKey Remove

Remove a specified option key.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey Remove Type:
where
: MultiSite/RemoteMonitoring
Type
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration
Type
xCommand xCommand

xCommand SystemUnit OptionKey RemoveAll

Remove all option keys.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey RemoveAll Confirm:
where
: Yes
Confirm

xCommand SystemUnit SoftReset

Reset most parameters to their default values. This does not include parameters associated
with room setup, such as camera position, language, and volume.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit SoftReset Confirm:
where
: Yes
Confirm
138
API Reference Guide
xStatus Appendices
Confirm
Confirm
Copyright © 2017 Cisco Systems, Inc. All rights reserved.