Standby Configuration; Xconfiguration Standby Control; Xconfiguration Standby Delay; Xconfiguration Standby Bootaction - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

Standby configuration

xConfiguration Standby Control

Define whether the system should go into standby mode or not.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Standby Control:
where
: Off/On
Control
Off: The system will not enter standby mode.
On: The system will enter standby mode when the Standby Delay has timed out.
Requires the Standby Delay to be set to an appropriate value.

xConfiguration Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.
Requires the Standby Control to be enabled.
Requires user role: ADMIN
Default value: 10
USAGE:
xConfiguration Standby Delay: Delay
where
: Integer (1..480)
Delay
Set the standby delay (minutes).
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration
Control
xCommand

xConfiguration Standby BootAction

Define the camera position after a restart of the codec.
Requires user role: ADMIN, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby BootAction:
where
: None/DefaultCameraPosition/RestoreCameraPosition
BootAction
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.

xConfiguration Standby StandbyAction

Define the camera position when going into standby mode.
Requires user role: ADMIN
Default value: PrivacyPosition
USAGE:
xConfiguration Standby StandbyAction:
where
: None/PrivacyPosition
StandbyAction
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
90
API Reference Guide
xStatus Appendices
BootAction
StandbyAction
Copyright © 2017 Cisco Systems, Inc. All rights reserved.