Xconfiguration Standby Wakeupaction; Systemunit Configuration; Xconfiguration Systemunit Name - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration Standby WakeupAction

Define the camera position when leaving standby mode.
Requires user role: ADMIN, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction:
where
: None/RestoreCameraPosition/DefaultCameraPosition
WakeupAction
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration
WakeupAction
xCommand

SystemUnit configuration

xConfiguration SystemUnit Name

Define the system name. The system name will be sent as the hostname in a DHCP request
and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SystemUnit Name: "Name"
where
: String (0, 50)
Name
Define the system name.
91
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.