Security Commands; Xcommand Security Persistency; Xcommand Security Session List; Xcommand Security Session Terminate - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

Security commands

xCommand Security Persistency

Set the following features to persistent or non-persistent mode. In non-persistent mode
the information gathered by the specified feature does not persist a reboot of the system.
Persistent mode is the default. This command reboots the system.
Requires user role: ADMIN
USAGE:
xCommand Security Persistency Configurations:
CallHistory InternalLogging: InternalLogging
DHCP: DHCP ConfirmAndReboot: ConfirmAndReboot
where
: NonPersistent/Persistent
Configurations
In non-persistent mode, all configurations are set back to default when the system
reboots.
: NonPersistent/Persistent
CallHistory
In non-persistent mode call history is deleted when the system reboots.
: NonPersistent/Persistent
InternalLogging
In non-persistent mode eventlog is deleted when the system reboots.
: NonPersistent/Persistent
LocalPhonebook
In non-persistent mode local phone book is deleted when the system reboots.
: NonPersistent/Persistent
DHCP
In non-persistent mode all IP related information is deleted when the system reboots.
: Yes
ConfirmAndReboot
Reboots the system.

xCommand Security Session List

List active sessions.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Session List
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration
Configurations CallHistory:
LocalPhonebook: LocalPhonebook
xCommand xCommand

xCommand Security Session Terminate

Terminate a session.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Session Terminate SessionId: "SessionId"
where
: String (0, 32)
SessionId
The session ID number.
136
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.