Cisco TelePresence SX20 Codec
Introduction
xCommand Audio VuMeter Start
Start a VU meter to show the audio signal level on the specified connector. You have to specify
both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the
connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start ConnectorID:
ConnectorType
where
: Integer (1..2) for Microphone; Integer (1..1) for Line
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector.
: Line/Microphone
ConnectorType
Select the connector type.
xCommand Audio VuMeter Stop
Stop the VU meter on the specified connector. You have to specify both the connector's type
and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop ConnectorID:
ConnectorType
where
: Integer (1..2) for Microphone; Integer (1..1) for Line
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector.
: Line/Microphone
ConnectorType
Select the connector type.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API
xConfiguration
ConnectorID
ConnectorType:
ConnectorID
ConnectorType:
xCommand
xCommand
xCommand Audio VuMeter StopAll
Stop all VU meters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
112
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Need help?
Do you have a question about the TelePresence SX20 Codec and is the answer not in the manual?
Questions and answers