Xconfiguration Usermanagement Ldap Admin Filter; Xconfiguration Usermanagement Ldap Admin Group; Xconfiguration Usermanagement Ldap Attribute - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration UserManagement LDAP Admin Filter

The LDAP filter is used to determine which users should be granted administrator privileges. If
set, this setting takes precedence over the UserManagement LDAP Admin Group setting.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Admin Filter: "Filter"
where
: String (0, 1024)
Filter
Refer to the LDAP specification for the syntax of this string. Example: "(CN=adminuser)"

xConfiguration UserManagement LDAP Admin Group

Members of this AD (Active Directory) group will be given administrator access. This
setting is a shorthand for saying (memberOf:1.2.840.113556.1.4.1941:=<group name>). If
UserManagement LDAP Admin Filter is set, this setting is ignored.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Admin Group: "Group"
where
: String (0, 255)
Group
The distinguishing name of the AD group. Example: "CN=admin_group, OU=company
groups, DC=company, DC=com"
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration xCommand

xConfiguration UserManagement LDAP Attribute

The attribute used to map to the provided username. If not set, sAMAccountName is used.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Attribute: "Attribute"
where
: String (0, 255)
Attribute
The attribute name.
97
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.