Httpfeedback Commands; Xcommand Httpfeedback Deregister; Xcommand Httpfeedback Register - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

HttpFeedback commands

xCommand HttpFeedback Deregister

Deregister the HTTP feedback over HTTP(S).
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Deregister FeedbackSlot:
where
: Integer (1..4)
FeedbackSlot
Deregister the feedback slot that was registered using the xCommand HttpFeedback
Register command.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration
FeedbackSlot
xCommand xCommand

xCommand HttpFeedback Register

Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Register FeedbackSlot:
ServerUrl: "ServerUrl" [Expression[1..15]: "Expression[1..15]"]
where
: Integer (1..4)
FeedbackSlot
The codec can register up to 4 slots of servers requesting HTTP feedback. Set the
registering to one of them.
Note: Avoid using FeedbackSlot 3 in an environment where Cisco TelePresence
Management Suite (TMS) is used as TMS uses this feedbackslot to register its
expressions.
: XML/JSON
Format
Set the format for the feedback from the HTTP server to XML or JSON.
: String (1, 2048)
ServerUrl
The URL to the HTTP server where you want the codec to post the HTTP feedback
messages to.
: String (1, 255)
Expression[1..15]
The XPath expression specifies which parts of the Status, Configuration or Event XML
documents are monitored. You can have from 1 to 15 XPath expressions.
125
API Reference Guide
xStatus Appendices
FeedbackSlot [Format: Format]
Copyright © 2017 Cisco Systems, Inc. All rights reserved.