Cisco TelePresence SX20 Codec
Introduction
xCommand Camera Preset Edit
Edit a stored camera preset. You can change the name of the camera preset and its position in
the list that is returned by the xCommand Camera Preset List command. You can also change
whether or not this preset is the default position for the associated camera.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras and the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Edit PresetId:
[Name: "Name"] [DefaultProsition: DefaultProsition]
where
: Integer (1..35)
PresetId
The ID of the camera preset you want to edit.
: Integer (1..35)
ListPosition
The position in the list returned by the xCommand Camera Preset List command.
: String (0, 255)
Name
The name of the camera preset. It will be used in the list returned by the xCommand
Camera Preset List command.
: False/True
DefaultProsition
Defines whether or not this preset is the default position for the associated camera.
Note that each camera can only have one default position, so if set, the old default
preset will automatically be marked as not default.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API
xConfiguration
PresetId
[ListPosition: ListPosition]
xCommand
xCommand
xCommand Camera Preset List
List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset List CameraId:
DefaultPosition]
where
: Integer (1..1)
CameraId
Only list presets for the specified camera.
: False/True
DefaultPosition
List default positions only, or only those that are not default positions.
xCommand Camera Preset Remove
Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Remove PresetId:
where
: Integer (1..35)
PresetId
The ID of the camera preset you want to remove.
120
API Reference Guide
xStatus
Appendices
CameraId
[DefaultPosition:
PresetId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.