Z Zigzag Lever Assembly Attachment; Z Zigzag Lever Assy Assembly - Brother BC800 Service Manual

Main unit
8

Z zigzag lever assembly attachment

1. Attach the polyester slider 2 to the Z zigzag lever shaft 1 of the base
holder assembly.
2. Apply a bead of EPNOC AP (N) 0 to the Z zigzag lever shaft 1 of the base
holder assembly.
3. Attach the Z zigzag lever assembly 3, and then attach the retaining ring
(E4).
*Key point
• Place the caulking shaft 4 on the left side of the Z-zigzag cam
5.
Start movie clip (CD-ROM version only)
Apply EPNOC AP (N) 0 to the Z zigzag lever shaft of
the base holder assembly.
8-1

Z zigzag lever ASSY assembly

1. Attach the Z zigzag cap 2 to the Z zigzag lever 1.
Needle-presser unit
2
Bead
XC8387***
4
3
1
5 Retaining ring E4
1
2
3 - 39