Brother SL100 Service Manual page 75

Application of
Disassembly
17.Remove the screw (set screw, socket (CP) M4X6) from the shaft supporter. And pull out the outer
rotary hook shaft to remove the washer, the magnet, the washer, the outer rotary hook assy and the
washer,thrust from the shaft supporter.
18.Remove the two screws (taptite, pan P (S/P W) 3X12) to remove the shaft supporter from the feed
holder.
Outer rotary hook shaft
Outer rotary hook assy
Taptite, pan P (S/P W) 3X12
Shaft supporter
Feed holder
Feed unit
Washer
Magnet
Washer
3 - 17
Set Screw, Socket (CP) M4X6
Hex wrench 2.0 mm
Taptite, Pan P (S/P W) 3X12
Wahser,thrust
Set screw, socket (CP) M4X6