Download  Print this page

Advertisement

Application of
Assembly
12.Set the thread take-up lever and the needle bar crank rod assy to the needle bar block shaft of needle
bar crank rod assy.
13.Set the thread take-up lever link to the shaft and the shaft of thread take-up lever. And set the spring
(XF3413) and the washer, and attach the retaining ring E4.
14.Set the presser foot holder to the presser bar sub assy, and secure it with the screw (tightening screw
3.57).
Tightening screw 3.57
Presser foot holder
Bobbin winder, Upper shaft, Needle-Presser module
Shaft
Needle bar
block shaft
Thread take-up lever
Presser bar sub assy
3 - 35
Tightening screw 3.57
Spring (XF3413)
Retaining ring E4
Thread take-up lever link
Needle bar
Spring (XF3413)
crank rod assy
Washer

Advertisement

Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: