Disassembly Of Feed Module - Brother SL100 Service Manual

Application of
Disassembly
3

Disassembly of Feed module

1. Remove the two screws (screw needle plate) to remove the needle plate B from the needle plate holder
assy.
2. Remove the two screws (screw, pan (P washer) M2.6X6) to remove the needle plate A from the needle
plate B.
3. Remove the four screws (taptite, pan P (S/P W) 3X12) to remove the needle plate holder assy from the
feed holder.
4. Remove the screw (screw, bind M3X3), and remove the spring plate and the spring assist plate from
the needle plate holder.
5. Remove the inner rotary hook assy from the outer rotary hook assy.
6. Remove the sheet from the feed adjuster holder.
Screw needle plate
Screw, Pan (P washer) M2.6X6
Taptite, Pan P (S/P W) 3X12
Screw, Bind M3X3
Feed unit
Needle plate A
Taptite, pan P (S/P W) 3X12
Screw needle plate
Needle plate B
Spring plate
Needle plate holder
Screw, pan
Spring assist plate
(P washer)
M2.6X6
Inner rotary hook assy
Feed holder
3 - 11
Pins
Outer rotary hook assy
Screw, bind
M3X3
Sheet
Feed
adjuster
holder