Disassembly Of Tension Pulley Assy - Brother SL100 Service Manual

Application of
Disassembly
1

Disassembly of Tension pulley assy

1. Remove the retaining ring E3 to remove the motor tension pulley assy and the spring (XF3404) from
the shaft of tension pulley holder B assy.
2. Remove the screw (screw, pan (S/P washer) M4X8) to remove the M tension pulley stopper from the
tension pulley holder B assy.
3. Remove the screw (screw, pan (S/P washer) M4X8) to remove the tension pulley sub assy from the
tension pulley holder B assy.
Tension pulley sub assy
Tension pulley holder B assy
Screw, Pan (S/P washer) M4X8
Feed unit
M tension pulley stopper
Screw, pan (S/P washer) M4X8
3 - 9
Spring (XF3404)
Shaft
Spring (XF3404)
Motor tension pulley assy
Boss
Retaining ring E3