Brother SL100 Service Manual page 74

Application of
Disassembly
15.Release the two hooks to pull out the feed arm B assy from the feed arm A sub assy. And remove the
screw (taptite, cup B M4X10) to remove the feed supporting plate from the feed arm B assy.
16.Remove the retaining ring E3 from the horizontal feed shaft, and pull out the horizontal feed shaft to
remove the horizontal feed shaft washer, the horizontal feed shaft spring (XF3451), the two polyester
sliders from the feed arm A sub assy. And remove the retaining ring E3 from the horizontal feed shaft.
Taptite, Cup B M4X10
Feed arm A sub assy
Hooks
Taptite, cup B M4X10
Feed unit
Horizontal feed shaft
Retaining ring E3
Feed arm B assy
Feed supporting plate
3 - 16
Groove A
Groove B
Retaining ring E3
Polyester sliders
Horizontal feed shaft spring (XF3451)
Horizontal feed shaft washer
Horizontal feed shaft spring (XF3451)