Brother SL100 Service Manual page 121

Preparation
<From previous page>
8. Remove the reverse sewing button.
9. Pull down the presser foot lifter.
10. Remove the three screws (taptite, cup P M4X20), and then remove the rear cover assy from the arm bed while
the "A" of rear cover assy is bending.
Presser foot lifter
Removal of covers
Rear cover assy
"A"
4 - 3
Taptite, Cup P M4X20
Taptite, cup P M4X20
Taptite, cup P M4X20
Reverse sewing button
Taptite, cup P
M4X20