Main Motor Unit; Removal Of Led Lamp Assy - Brother SL100 Service Manual

Basic of Disassembly
1

Removal of LED lamp assy

1. Remove the two screws (taptite, bind S M4X10) to remove the two cord clamps from the arm bed, and
then remove the two cord clamps from the lead wire of LED lamp assy.
2. Disconnect the connector of LED lamp assy from the PCB of motor 3P supply assy.
PCB
Motor 3P
supply assy
3. Remove the screw (screw, pan (S/P washer) M4X8) to remove the LED lamp assy from the base holder
assy.
Screw, Pan (S/P washer) M4X8
Screw, pan (S/P washer) M4X8

Main motor unit

Taptite, bind S M4X10
Cord clamps
Connector of LED
lamp assy
Base holder assy
LED lamp assy
2 - 8
Taptite, Bind S M4X10
Lead wire of LED
lamp assy