Disassembly Of Rear Cover Assy - Brother SL100 Service Manual

Application of
Disassembly
2

Disassembly of Rear cover assy

1. Remove the spool pin from the rear cover while pulling the spool pin spring.
2. Remove the spool pin spring from the rear cover.
3. Remove the spool pin stand from the rear cover.
4. Remove the screw (taptite, pan P (S/P W) 3X12) to remove the bobbin presser from the rear cover.
5. Remove the screw (taptite, cup P M4X20) to remove the thread guide assy from the rear cover.
Taptite, pan P (S/P W) 3X12
Bobbin presser
Spool pin spring
Spool pin stand
Rear cover
Taptite, Pan P (S/P W) 3X12
Taptite, Cup P M4X20
Main frame and Covers
Spool pin
3 - 4
Positioning groove
Spool pin spring
Thread guide assy
Taptite, cup P M4X20