Download  Print this page

Disassembly Of Thread Tension Dial Assembly - Brother SL100 Service Manual

Hide thumbs


Application of

Disassembly of Thread tension dial assembly

1. Release the hook to turn the thread tension stand in the direction of the arrow while pulling the hook,
and then align the three tabs of thread tension stand with the three notch parts of tension control holder
assy, and remove it from the tension control holder assy.
2. Remove the thread tension label from the tension control knob. And remove the screw (taptite, bind B
M3X10) to remove the tension control knob from the thread tension stand. And remove the tension
control stud to remove the tension control nut and the tension spring (X55630) from the thread tension
stand. And pull out the tension disc plate, the two tension discs, the thread tension disc presser and the
spring (X55821) from the thread tension stand.
3. Remove the retaining ring E4 to remove the upper tension control releaser from the shaft on tension
control holder assy.
Tension spring
Tension control nut
Upper tension
control releaser
Notch part
Needle threading mechanism
Retaining ring E4
Tension control holder assy
Thread tension stand
line part
Notch part
Hook part
Notch part
Tension discs
Notch part
Tension disc plate
Thread tension stand
3 - 20
Spring (X55821)
Thread tension disc presser
Tension control stud
Tension control knob
Thread tension label
Taptite, Bind B M3X10
Tension spring (X55630)
Spring (X55821)
Taptite, bind B M3X10


Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: