Download  Print this page

Assembly Of Tension Pulley Assy - Brother SL100 Service Manual

Hide thumbs

Advertisement

Application of
Assembly
4

Assembly of Tension pulley assy

1. Align the positioning hole of tension pulley sub assy with the boss of tension pulley holder B assy, and
set the tension pulley sub assy to the tension pulley holder B assy, and tighten the screw (screw, pan
(S/P washer) M4X8) temporarily.
*Key point
• Fully tighten the screw after performing
2. Set the M tension pulley stopper to the tension pulley holder B assy, and tighten the screw (screw, pan
(S/P washer) M4X8) temporarily.
*Key point
• Fully tighten the screw after performing
3. Set the spring (XF3404) to the boss of motor tension pulley assy, and insert them into the shaft of
tension pulley holder B assy, and secure them with the retaining ring E3. And hang the hook of spring
on the one of five notches on the tension pulley holder B assy.
Tension pulley sub assy
Positioning hole
Tension pulley holder B assy
Screw, Pan (S/P washer) M4X8
Spring (XF3404)
Feed unit
"4 - 5 Timing belt
"4 - 6 Motor belt
Shaft
Boss
M tension pulley stopper
Screw, pan (S/P washer) M4X8
3 - 54
tension".
tension".
Hook
Motor tension pulley assy
Spring (XF3404)
Boss
Retaining ring E3

Advertisement

Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: