Download  Print this page

Advertisement

Application of
Assembly
14.Assemble the feed stand and the feed arm A sub assy, and attach the two feed arm A pins, and secure
them with the four hooks.
15.Set the feed dog to the feed stand, and tighten the two screws (bolt, socket M3X5) temporarily.
*Key point
• Fully tighten the two screws after performing
Bolt, socket M3X5
Feed dog
Feed arm B assy
Hooks
Feed arm A pin
Feed unit
"4 - 22 Left and right stitch of buttonhole stitch
3 - 51
Feed stand
Hooks
Feed arm A sub assy
length".
Bolt, Socket M3X5
Hex wrench 2.5 mm
Feed arm A pin

Advertisement

Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: