Download  Print this page

Advertisement

Application of
Assembly
9. Set the feed adjuster to the feed adjuster spring (XF5127) and the feed adjuster holder. And align the
two tabs of feed adjuster with the two grooves of feed adjuster holder, and turn the feed adjuster 90
degrees while pushing it in the direction of the arrow and lock it.
*Key point
• Confirm that the feed adjuster is attached in the direction of the illustration below.
10.Insert the shaft of feed arm B assy into the groove of feed adjuster, and set the feed adjuster holder to
the feed holder, and secure it with the two screws (taptite, pan P (S/P W) 3X12).
Taptite, Pan P (S/P W) 3X12
Feed adjuster spring (XF5127)
Feed adjuster
Groove
Feed unit
Taptite, pan P (S/P W) 3X12
Shaft
3 - 49
Feed adjuster holder
Groove
Feed adjuster
Feed holder
Feed arm B assy
Feed adjuster spring (XF5127)
Tab
Groove
Tab

Advertisement

Table of Contents

   Related Manuals for Brother SL100

Comments to this Manuals

Symbols: 0
Latest comments: