Ethernet; Direct Inputs - GE G60 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES

# ETHERNET

#
PATH: ACTUAL VALUES

# DIRECT INPUTS

#
6
The
AVERAGE MSG RETURN TIME
ring configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the last 10
messages. There are two return times for dual-channel communications modules.
The
UNRETURNED MSG COUNT
make the trip around the communications ring. The
direct output messages that have been received but fail the CRC check. High values for either of these counts may indicate
on a problem with wiring, the communication channel, or the relay(s). The
values can be cleared using the
The values represent the state of the x-th direct input.
DIRECT INPUT x
6-6
! !"
STATUS ETHERNET
ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
MESSAGE
STATUS: OK
! !"
STATUS DIRECT INPUTS
AVG MSG RETURN
TIME CH1: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH1: 0
CRC FAIL COUNT
MESSAGE
CH1: 0
AVG MSG RETURN
MESSAGE
TIME CH2: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH2: 0
CRC FAIL COUNT
MESSAGE
CH2: 0
DIRECT INPUT 1:
MESSAGE
On
DIRECT INPUT 32:
MESSAGE
On
is the time taken for direct output messages to return to the sender in a direct input/output
values (one per communications channel) count the direct output messages that do not
CLEAR DIRECT I/O COUNTERS
G60 Generator Management Relay
Range: Fail, OK
Range: Fail, OK
↓
values (one per communications channel) count the
CRC FAIL COUNT
UNRETURNED MSG COUNT
command.
6 ACTUAL VALUES
6.2.10 ETHERNET
6.2.11 DIRECT INPUTS
and
CRC FAIL COUNT
GE Multilin