Digital Counters; Selector Switches; Flex States - GE G60 Instruction Manual

6 ACTUAL VALUES
b) STATISTICS
!
PATH: ACTUAL VALUES STATUS
# REMOTE DEVICE
1
#
MESSAGE
Statistical data (2 types) for up to 16 programmed Remote Devices is shown here.
The StNum number is obtained from the indicated Remote Device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated Remote Device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4,294,967,295 is incremented.
!
PATH: ACTUAL VALUES

DIGITAL COUNTERS

# DIGITAL COUNTERS
# Counter 1
MESSAGE
MESSAGE
MESSAGE
The present status of the 8 digital counters is shown here. The status of each counter, with the user-defined counter name,
includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date/time stamp
for the frozen count. The
Counter n MICROS
!
PATH: ACTUAL VALUES STATUS

# SELECTOR SWITCHES

#
MESSAGE
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
!
PATH: ACTUAL VALUES STATUS

# FLEX STATES

#
MESSAGE
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
GE Multilin
!"
REMOTE DEVICES STATISTICS
REMOTE DEVICE 1
StNum:
REMOTE DEVICE 1
SqNum:
!"
DIGITAL COUNTERS
Counter 1 ACCUM:
0
Counter 1 FROZEN:
0
Counter 1 FROZEN:
YYYY/MM/DD HH:MM:SS
Counter 1 MICROS:
0
value refers to the microsecond portion of the time stamp.
!"
SELECTOR SWITCHES
SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
POSITION: 0/7
!"
FLEX STATES
PARAM 1: Off
Off
↓
PARAM 256: Off
Off
G60 Generator Management Relay
!
REMOTE DEVICE 1(16)
0
0
!
DIGITAL COUNTERS Counter 1(8)
6.2.8 SELECTOR SWITCHES
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
Range: Off, On
6.2 STATUS
6.2.7 DIGITAL COUNTERS
6.2.9 FLEX STATES
6-5
6