GE G60 Instruction Manual page 81

4 HUMAN INTERFACES
d) ACTIVATING THE RELAY
RELAY SETTINGS:
Not Programmed
To change the
RELAY SETTINGS:
1. Press the key until the
appears on the display.
2. Press the MESSAGE
3. Press the MESSAGE
4. Press the MESSAGE
SETTINGS
"
## SETTINGS
## PRODUCT SETUP
5. After the
RELAY SETTINGS:
selection to "Programmed".
6. Press the key.
RELAY SETTINGS:
Not Programmed
7. When the "NEW SETTING HAS BEEN STORED" message appears, the relay will be in "Programmed" state and the
In Service LED will turn on.
e) ENTERING INITIAL PASSWORDS
To enter the initial Setting (or Command) Password, proceed as follows:
1. Press the key until the
appears on the display.
2. Press the MESSAGE
3. Press the MESSAGE
SETTINGS
"
## SETTINGS
## PRODUCT SETUP
GE Multilin
When the relay is powered up, the Trouble LED will be on, the In Service LED off, and
this message displayed, indicating the relay is in the "Not Programmed" state and is
safeguarding (output relays blocked) against the installation of a relay whose settings
have not been entered. This message remains until the relay is explicitly put in the
"Programmed" state.
"Not Programmed" mode to "Programmed", proceed as follows:
header flashes momentarily and the
SETTINGS
key until the
PASSWORD SECURITY
key until the message appears on the display.
INSTALLATION
key until the
RELAY SETTINGS:
# PASSWORD
# SECURITY
# DISPLAY
# PROPERTIES
# USER-DEFINABLE
# DISPLAYS
# INSTALLATION
#
Not Programmed message appears on the display, press the VALUE keys change the
RELAY SETTINGS:
Programmed
header flashes momentarily and the
SETTINGS
key until the message appears on the display.
ACCESS LEVEL
key until the
CHANGE SETTING
# PASSWORD
# SECURITY
G60 Generator Management Relay
SETTINGS PRODUCT SETUP
message appears on the display.
Not Programmed message is displayed.
↓
SETTINGS PRODUCT SETUP
(or ) message appears on the display.
COMMAND PASSWORD
ACCESS LEVEL:
Restricted
4.2 FACEPLATE INTERFACE
message
RELAY SETTINGS:
Not Programmed
NEW SETTING
HAS BEEN STORED
message
4-11
4