Rear Terminal Layout - GE G60 Instruction Manual

3 HARDWARE 3.1 DESCRIPTION

3.1.3 REAR TERMINAL LAYOUT

3
830720A1.CDR
Figure 3–6: REAR TERMINAL VIEW
Do not touch any rear terminals while the relay is energized!
WARNING
The relay follows a convention with respect to terminal number assignments which are three characters long assigned in
order by module slot position, row number, and column letter. Two-slot wide modules take their slot designation from the
first slot position (nearest to CPU module) which is indicated by an arrow marker on the terminal block. See the following
figure for an example of rear terminal assignments.
Figure 3–7: EXAMPLE OF MODULES IN F AND H SLOTS
GE Multilin G60 Generator Management Relay 3-5