General; Contents Of This Document; Data Transfer Properties; Configuration Parameters - Fronius Profinet Robacta CTC Operating Instructions Manual

General

Contents of this This document contains Profinet configuration and application information for
document -
-
Data transfer
Transmission technology:
properties
Network topology:
Medium:
Transmission rate:
Bus connection:
Configuration
Configuration parameters for Robacta TX, Robacta TX 10i, Robacta TX/i
parameters
TWIN
Vendor ID:
Device ID:
Station Type.
Configuration parameters for all other devices
Vendor ID:
Device ID:
Station Type:
Device master A device master file is assigned to every participant in a Profinet network. The
file for fieldbus device master file contains all information about the participant and is required
coupler BK9103
for the network configuration.
-
-
32
The robot interface Robacta FB 8I_8O (serves for example as robot interface
for Robacta CTC)
The Profinet interfaces of Robacta TX, TX 10i, TW/i TWIN
01B0
0201
fronius-tx-4-100-707
0120
02328
bk9103
The device master file for Robacta TX, Robacta TX 10i, Robacta TX/i TWIN
can be found at: www.fronius.com
The device master file for all other devices can be found at:
www.beckhoff.com
Ethernet
Star, line
Twisted pair cable
100 Mbit/s, full duplex mode
Profinet RJ 45 AIDA
hex
hex
hex
hex