Forced Unscreened Transfer - NEC SL1100 Feature Manual

SL1100
Description
A Subscriber can optionally convert Automated Attendant Screened Transfers to Unscreened
Transfers by enabling this option in the Mailbox user interface.
• Calls from the Automated Attendant ring like other transferred calls and display the incoming Caller
ID data (if provided by telco and enabled in programming) as the call is ringing.
• As with Screened Transfers, unanswered calls route to the subscriber's greeting (recorded or
default) so the caller can leave a message. However, with Unscreened Transfer the caller cannot
F
dial 2 to reach the Next Call Routing Mailbox options (if programmed).
Related Features
Dial Action Table on page 2-60
If enabled in the Subscriber Mailbox, InMail automatically converts any Screened Transfers (TRFs) to
the subscriber's extension to Unscreened Transfers (UTRFs).
Screened Transfer on page 2-217
After the Automated Attendant caller dials an extension, InMail calls (screens) the destination
extension to see if the transfer can go through.
Unscreened Transfer on page 2-238
After an Automated Attendant caller dials an extension, InMail immediately transfers the call to the
extension and hangs up.
Programming
1. Enable Forced Unscreened Transfer for the Subscriber Mailbox.
Program
Number
47-02-10
Operation
Not applicable.
2-106

Forced Unscreened Transfer

Program Name
Forced Unscreened Transfer
(Forced UTRF)
Description
Enter 1 (Yes) to enable this option to automatically convert Automa-
ted Attendant Screened Transfers to Unscreened Transfers.
By default, this option is disabled (0).
Forced Unscreened Transfer
ISSUE 3.5