NEC SL1100 Feature Manual page 261

ISSUE 3.5
Programming Incoming Ring Group Overflow
1. Set up the Incoming Ring Group trunks.
Program Program Name
Number
22-02-01 Incoming Call Trunk Setup
2. Assign InMail as the overflow (no answer) destination.
Program Program Name
Number
22-08-01 DIL/IRG No Answer Destina-
tion
3. Set the interval after which unanswered calls should route to the overflow destination.
Program Program Name
Number
22-01-04 DIL No Answer Recall Time
Programming DID Overflow
1. Set up the Incoming Ring Group trunks.
Program Program Name
Number
22-02-01 Incoming Call Trunk Setup
InMail Feature Manual
Description
Assign Service Type 0 (Normal) to each Incoming Ring Group
trunk. Make a separate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
Description
For each trunk assigned as an Incoming Ring Group trunk above,
enter the InMail Department Group pilot number to make InMail the
overflow (no answer) destination.
By default, the overflow (no answer) destination is Incoming Ring
Group 1.
Description
Enter the interval after which unanswered calls should overflow to
the programmed overflow (no answer) destination.
By default, this interval is 0 (no overflow).
Description
Assign Service Type 3 (DID) to each Incoming trunk. Make a sepa-
rate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
SL1100
V
2-243